Differences between revisions 4 and 13 (spanning 9 versions)

POX11

Modification history

The Dark Ages
Jun 5, 2011 Built by Rana
- http://nodus.ligo.caltech.edu:8080/40m/4786
Jun 5, 2011 Characterized by Koji
- http://nodus.ligo.caltech.edu:8080/40m/4787

Schematic

[attachment:POX11_response.pdf PDF file]

Characteristics

DC output / transimpedance: 50 V/A
RF output / transimpedance: 3.15 kV/A (on a 50 Ohm load)
RF ouput / shotnoise intercept current: 0.138mA

[attachment:POX11_response.pdf PDF file]

attachment:POX11_transimpedance.png

attachment:current_noise_POX11.png

attachment:idet_POX11.png

LISO fitting

LISO fitting of the RF transimpedance

attachment:POX11.fil

LISO source file

zero 42.0209770199k  ### fitted (name = zero0)
zero 21.4385886990k 901.5737027400m  ### fitted (name = zero1)
zero 345.1064365864k 1.9174969667  ### fitted (name = zero2)
zero 8.3099095829M 14.0393660015  ### fitted (name = zero3)
zero 48.7192897486M 9.5158532455  ### fitted (name = zero4)
zero 52.5242155835M 13.5807498465  ### fitted (name = zero5)

pole 21.4798931345k 217.9173343559m  ### fitted (name = pole0)
pole 360.0319189605k 3.3928604398  ### fitted (name = pole1)
pole 8.3189834238M 8.0999659790  ### fitted (name = pole2)
pole 11.1163023352M 11.9342000980  ### fitted (name = pole3)
pole 68.0900615464M 3.4819808610  ### fitted (name = pole4)
pole 75.2362606120M 1.1532825011  ### fitted (name = pole5)
pole 300.5159266309M 4.7462246849  ### fitted (name = pole6)
pole 88.0291770357M  ### fitted (name = pole7)

factor 1
delay 2.5329722112n  ### fitted

param zero0:f 10k 1M
param zero1:f 10k 10G
param zero1:q  0.01 100
param zero2:f 1k 1000M
param zero2:q  0.1 100
param zero3:f 10k 1000M
param zero3:q  0.1 100
param zero4:f 1k 1000M
param zero4:q  0.1 100
param zero5:f 1k 1000M
param zero5:q  0.1 1G
param pole0:f 1k 1G
param pole0:q  0.1 1000
param pole1:f 1k 1000M
param pole1:q  0.1 1000
param pole2:f 1M 1000M
param pole2:q  0.1 100
param pole3:f 1M 1000M
param pole3:q  0.1 100
param pole4:f 10M 1000M
param pole4:q  0.1 100
param pole5:f 1k 1000M
param pole5:q  0.1 100
param pole6:f 1M 1G
param pole6:q  0.1 100
param pole7:f 10k 1G
#param factor 1p 1M
param delay 1p 1m

fit POX11.bod absdeg semi
rewrite samebetter
gnuterm pdf
freq log 1k 500M 1000 ### from data file

-  ⇤ ← Revision 4 as of 2011-02-03 08:08:06 → 
  Size: 921
  Editor: JenneDriggers
  Comment:
+   ← Revision 13 as of 2011-11-08 01:02:02 → ⇥
  Size: 2376
  Editor: KojiArai
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-= POY =
+= POX11 =
== Modification history ==
 * The Dark Ages
 * Jun 5, 2011 Built by Rana
  * http://nodus.ligo.caltech.edu:8080/40m/4786
 * Jun 5, 2011 Characterized by Koji
  * http://nodus.ligo.caltech.edu:8080/40m/4787
-Line 3:
+Line 9:
-== RF Transimpedance ==
+== Schematic ==
[attachment:POX11_response.pdf PDF file]
-Line 5:
+Line 12:
-attachment:transimpedance.png
+== Characteristics ==
 * DC output / transimpedance: 50 V/A
 * RF output / transimpedance: 3.15 kV/A (on a 50 Ohm load)
 * RF ouput / shotnoise intercept current: 0.138mA
-Line 7:
+Line 17:
-The above fit was done in LISO in root mode. The results of the fit are the following:
+[attachment:POX11_response.pdf PDF file]
-Line 9:
+Line 19:
-factor = (1.11 +- 0.03) Ohms
+attachment:POX11_transimpedance.png
-Line 11:
+Line 21:
-delay = (370 +- 60) ps
+attachment:current_noise_POX11.png
-Line 13:
+Line 23:
-five poles:
|| frequency (MHz) || Q ||
|| 11.133 +- 0.002 || 15.85 +- 0.09 ||
|| 24.82 +- 0.01 || 6.21 +- 0.03 ||
|| 41.0 +- 0.5 || 0.469 +- 0.006 ||
|| 228.8 +- 0.4 || 2.74 +- 0.03 ||
|| 9.77 +- 0.05 || 0.641 +- 0.003 ||
+attachment:idet_POX11.png
-Line 21:
+Line 25:
-five zeros:
|| frequency (MHz) || Q ||
|| 22.167 +- 0.003 || 52.5 +- 0.7 ||
|| 55.06 +- 0.03 || 20.6 +- 0.6 ||
|| 0.555 +- 0.007 || (600 +- 27) x 10^3^ ||
|| 9000 +- 4000 || (86 +- 2) x 10^3^ ||
|| 140 +- 50 || 0.09 +- 0.03 ||
+== LISO fitting ==
-Line 29:
+Line 27:
-chi^2/ndf = 557
+LISO fitting of the RF transimpedance
-Line 31:
+Line 29:
-== Noise ==
+attachment:POX11.fil
-Line 33:
+Line 31:
-attachment:noise.png
+LISO source file
{{{
zero 42.0209770199k  ### fitted (name = zero0)
zero 21.4385886990k 901.5737027400m  ### fitted (name = zero1)
zero 345.1064365864k 1.9174969667  ### fitted (name = zero2)
zero 8.3099095829M 14.0393660015  ### fitted (name = zero3)
zero 48.7192897486M 9.5158532455  ### fitted (name = zero4)
zero 52.5242155835M 13.5807498465  ### fitted (name = zero5)
-Line 35:
+Line 40:
-The noise data was fit to attachment:fitfunc.png with the following results:
+pole 21.4798931345k 217.9173343559m  ### fitted (name = pole0)
pole 360.0319189605k 3.3928604398  ### fitted (name = pole1)
pole 8.3189834238M 8.0999659790  ### fitted (name = pole2)
pole 11.1163023352M 11.9342000980  ### fitted (name = pole3)
pole 68.0900615464M 3.4819808610  ### fitted (name = pole4)
pole 75.2362606120M 1.1532825011  ### fitted (name = pole5)
pole 300.5159266309M 4.7462246849  ### fitted (name = pole6)
pole 88.0291770357M  ### fitted (name = pole7)
-Line 37:
+Line 49:
-''Z'',,RF,, = (3.860 +- 0.004) kOhms
+factor 1
delay 2.5329722112n  ### fitted
-Line 39:
+Line 52:
-''I'',,d,, = (2.036 +- 0.006) mA
+param zero0:f 10k 1M
param zero1:f 10k 10G
param zero1:q  0.01 100
param zero2:f 1k 1000M
param zero2:q  0.1 100
param zero3:f 10k 1000M
param zero3:q  0.1 100
param zero4:f 1k 1000M
param zero4:q  0.1 100
param zero5:f 1k 1000M
param zero5:q  0.1 1G
param pole0:f 1k 1G
param pole0:q  0.1 1000
param pole1:f 1k 1000M
param pole1:q  0.1 1000
param pole2:f 1M 1000M
param pole2:q  0.1 100
param pole3:f 1M 1000M
param pole3:q  0.1 100
param pole4:f 10M 1000M
param pole4:q  0.1 100
param pole5:f 1k 1000M
param pole5:q  0.1 100
param pole6:f 1M 1G
param pole6:q  0.1 100
param pole7:f 10k 1G
#param factor 1p 1M
param delay 1p 1m
-Line 41:
+Line 81:
-chi^2^ / ndf = 3.37
+fit POX11.bod absdeg semi
rewrite samebetter
gnuterm pdf
freq log 1k 500M 1000 ### from data file
}}}