|
Size: 911
Comment:
|
Size: 1216
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 31: | Line 31: |
| === Alberto's LISO Model === attachment:poy_tf.pdf |
|
| Line 37: | Line 41: |
| ''Z'',,RF,, = (2.07 +- 0.01) kOhms | ''Z'',,RF,, = (3.860 +- 0.004) kOhms |
| Line 39: | Line 43: |
| ''I'',,d,, = (247 +- 6) uA | ''I'',,d,, = (2.035 +- 0.006) mA |
| Line 41: | Line 45: |
| chi^2^ / ndf = 42 | chi^2^ / ndf = 3.37 === Alberto's LISO Model === attachment:poy_noise.pdf == RF Behavior with No Light == attachment:timeseries.png attachment:dark_spectrum.png == Picture of Photodiode == attachment:POY.jpg Picture taken on 2/3/2011 |
POY
RF Transimpedance
attachment:transimpedance.png
The above fit was done in LISO in root mode. The results of the fit are the following:
factor = (1.11 +- 0.03) Ohms
delay = (370 +- 60) ps
five poles:
frequency (MHz) |
Q |
11.133 +- 0.002 |
15.85 +- 0.09 |
24.82 +- 0.01 |
6.21 +- 0.03 |
41.0 +- 0.5 |
0.469 +- 0.006 |
228.8 +- 0.4 |
2.74 +- 0.03 |
9.77 +- 0.05 |
0.641 +- 0.003 |
five zeros:
frequency (MHz) |
Q |
22.167 +- 0.003 |
52.5 +- 0.7 |
55.06 +- 0.03 |
20.6 +- 0.6 |
0.555 +- 0.007 |
(600 +- 27) x 103 |
9000 +- 4000 |
(86 +- 2) x 103 |
140 +- 50 |
0.09 +- 0.03 |
chi^2/ndf = 557
Alberto's LISO Model
attachment:poy_tf.pdf
Noise
attachment:noise.png
The noise data was fit to attachment:fitfunc.png with the following results:
ZRF = (3.860 +- 0.004) kOhms
Id = (2.035 +- 0.006) mA
chi2 / ndf = 3.37
Alberto's LISO Model
attachment:poy_noise.pdf
RF Behavior with No Light
attachment:timeseries.png
attachment:dark_spectrum.png
Picture of Photodiode
attachment:POY.jpg
Picture taken on 2/3/2011