Differences between revisions 5 and 8 (spanning 3 versions)
⇤ ← Revision 5 as of 2018-08-06 06:44:33 →
Size: 890
Editor: DuotaoATligoDOTorg
Comment:
← Revision 8 as of 2018-08-06 07:39:03 → ⇥
Size: 893
Editor: DuotaoATligoDOTorg
Comment:
Deletions are marked like this. Additions are marked like this.
Line 15: Line 15:
 * Data: [[attachment:CDTrans.out]]
 * Plot: [[attachment:CDTrans.pdf]]
 * 1G: [[attachment:CDtrans-1G.pdf]]
 * 1k: [[attachment:CDTrans-1k.pdf]]

SUS Noise Monitor

Design goals

  • No saturations as long as the coil driver input signals are at the 99th percentile or below.
  • Provide enough gain (at 20 Hz and above) to boost the DAC noise above ADC noise.

Design inputs

  • DAC noise model: page 6 of G1401399.

  • PUM coil driver transfer function. LISO models are available here.

  • The worst-case dewhitening state for the noise monitor is ACQ off, LP on.

  • ADC noise level, about 4 uV/rtHz. (Reference: T070213)

  • Coil driver input spectra, G1801540.

Coil driver transfer function

Electronics/NoiseMonitor (last edited 2020-02-06 00:41:08 by DuotaoATligoDOTorg)