Differences between revisions 1 and 2
⇤ ← Revision 1 as of 2018-08-04 14:24:58 →
Size: 775
Editor: ChristopherwipfATligoDOTorg
Comment:
← Revision 2 as of 2018-08-06 06:39:12 → ⇥
Size: 831
Editor: DuotaoATligoDOTorg
Comment:
Deletions are marked like this. Additions are marked like this.
Line 13: Line 13:

=== Coil driver transfer function ===
Data:
Plot:

SUS Noise Monitor

Design goals

  • No saturations as long as the coil driver input signals are at the 99th percentile or below.
  • Provide enough gain (at 20 Hz and above) to boost the DAC noise above ADC noise.

Design inputs

  • DAC noise model: page 6 of G1401399.

  • PUM coil driver transfer function. LISO models are available here.

    • The worst-case dewhitening state for the noise monitor is ACQ off, LP on.

  • ADC noise level, about 4 uV/rtHz. (Reference: T070213)

  • Coil driver input spectra, G1801540.

Coil driver transfer function

Data: Plot:

Electronics/NoiseMonitor (last edited 2020-02-06 00:41:08 by DuotaoATligoDOTorg)