|
Size: 20823
Comment:
|
Size: 20823
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 85: | Line 85: |
| ||<#F7FF80> ETMU05 || 2.35deg (2deg21min) || 57.6 || 60.26 || - || - ||<style="text-align: center;"|4>13.7ppm ||<style="text-align: center;"|4>4.579% ||<style="text-align: center;"|4>93.3ppm ||<style="text-align: center;"|4>950ppm ||<style="text-align: center;">ETMX || | ||<#F7FF80> ETMU05 || 2.35deg (2deg21min) || 57.6 || 60.26 || - || - ||<style="text-align: center;"|4>13.7ppm ||<style="text-align: center;"|4>4.579% ||<style="text-align: center;"|4>93.3ppm ||<style="text-align: center;"|4>950ppm ||<style="text-align: center;">ETMY || |
| Line 87: | Line 87: |
| ||<#F7AFF0> ETMU07 || 2.36deg (2deg22min) || 57.1 || 59.48 || - || - ||<style="text-align: center;">ETMY || | ||<#F7AFF0> ETMU07 || 2.36deg (2deg22min) || 57.1 || 59.48 || - || - ||<style="text-align: center;">ETMX || |
Information of Core Optics
Basic information
Substrate Material: The material of the substrate is Corning 7980 Fused Silica, grade UV-0A. [http://www.corning.com/docs/specialtymaterials/pisheets/H0607_hpfs_Standard_ProductSheet.pdf Link to the data sheet of Corning 7980]
Calculation of the RoC spec Considerations on the parameters of PRC/SRC
- PRMs and SRMs will have the wedge angle larger than the spec (see below). PRMs were returned for repolish. Thus, their wedge angles might be vary. This is to be confirmed.
Status
Name |
Delivery |
Phase Map Measurement |
Stand off gluing |
Magnet gluing |
Hanging |
SOS tower installation |
Current Location |
PRMU02 |
done |
Oct 8, 2010 |
- |
- |
- |
- |
PRM (BS chamber) |
PRMU03 |
done |
Oct 8, 2010 |
- |
- |
- |
- |
40m |
PRMU04 |
done |
Oct 8, 2010 |
- |
- |
- |
- |
Adv. Thin Film (Oct 25, 2010) |
SRMU01 |
done |
Jan 25, 2010 |
- |
- |
- |
- |
Adv. Thin FIlm (Oct 25, 2010) |
SRMU03 |
done |
Jan 25, 2010 |
done |
done |
done |
done |
(Clean Room, storage) |
SRMU04 |
done |
Jan 25, 2010 |
done |
done |
done |
done |
SRM (ITMY Chamber) |
ITMU01 |
done |
Jan 22, 2010 |
- |
- |
- |
- |
40m |
ITMU02 |
done |
Jan 22, 2010 |
- |
- |
- |
- |
40m |
ITMU03 |
done |
Jan 22, 2010 |
done |
done |
done |
done |
ITMY (East arm) |
ITMU04 |
done |
Jan 22, 2010 |
done |
done |
done |
done |
ITMX (South arm) |
ETMU05 |
done |
@ATF |
done |
done |
done |
- |
Clean Room |
ETMU06 |
done |
@ATF |
- |
- |
- |
- |
40m |
ETMU07 |
done |
@ATF |
done |
done |
done |
done |
ETMX (South) |
ETMU08 |
done |
@ATF |
- |
- |
- |
- |
40m |
BS is unchanged from the previous one.
Specifications
Specifications Summary: [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/Spec_Number_Summary_E080460-05-D.pdf E080460-05-D]
PRM Specifications
RM Blank Drawing [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/RM-Blank-Drawing-D080487-00-D.pdf D080487-00-D]
RM Blank Spec [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/RM-Blank-Spec-E080455-00-D.pdf E080455-00-D]
PRM Substrate Drawing: Dia=75+/-0.5mm, Th=25mm+0/-0.5mm, Wedge = 2deg+/-5min [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/PRM-Substrate-Drawing-D080486-00-D.pdf D080486-00-D]
PRM Polish: RoC(S1)=115.5+/-5 m, RoC(S2)>5625 m [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/PRM-polish-E080452-02-D.pdf E080452-02-D]
PRM Coating: T(S1,HR)=5.75+/-0.25%, R(S2,AR)<300ppm [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/PRM-coating-E080458-03-D.pdf E080458-03-D]
SRM Specifications
RM Blank Drawing [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/RM-Blank-Drawing-D080487-00-D.pdf D080487-00-D]
RM Blank Spec [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/RM-Blank-Spec-E080455-00-D.pdf E080455-00-D]
SRM Substrate Drawing: Dia=75+/-0.5mm, Th=25mm+0/-0.5mm, Wedge = 2deg+/-5min [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/SRM-Substrate-Drawing-D080489-00-D.pdf D080489-00-D]
SRM Polish: RoC(S1)=142+/-5 m, RoC(S2)>5625 m [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/SRM-polish-E080453-02-D.pdf E080453-02-D]
SRM Coating: T(S1,HR)=10.0+/-0.5%, R(S2,AR)<300ppm [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/SRM-coating-E080459-01-D.pdf E080459-01-D]
ITM Specifications
ITM Blank Drawing [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ITM-Blank-Drawing-D080488-00-D.pdf D080488-00-D]
ITM Blank Spec [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ITM-Blank-Spec-E080456-00-D.pdf E080456-00-D]
ITM Substrate Drawing: Dia=75+/-0.5mm, Th=25mm+0/-0.5mm, Wedge = 2deg+/-5min [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ITM-Substrate-Drawing-D080490-00-D.pdf D080490-00-D]
ITM Polish: RoC(S1)>5623 m, RoC(S2)>5625 m [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ITM-polish-E080454-00-D.pdf E080454-00-D]
ITM Coating: T(S1,HR,1064nm)=1.4%+/-0.05%, T(S1,HR,532nm)=1.0%-2.5% (1.5% target), R(S2,AR,1064nm)=500ppm+/-100ppm, R(S2,AR,532nm)<1000ppm [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ITM-coating-E080457-02-D.pdf E080457-02-D]
ETM Specifications
ETM Blank Drawing [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ETM-Blank-Drawing-D0902842-00.pdf D0902842-00]
ETM Blank Spec [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ETM-Blank-Spec-E0900381.pdf E0900381]
ETM Substrate Drawing: Dia=75+/-0.5mm, Th=25mm+0/-0.5mm, Wedge = 2.5deg+/-5min [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ETM-Substrate-Drawing-D0902467-00.pdf D0902467-00]
ETM Polish: RoC(S1)=57.37+/-0.6 m, RoC(S2)>5625 m [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ETM-polish-E0900379-00.pdf E0900379-00]
ETM Coating: T(S1,HR,1064nm)=15ppm+/-10ppm, T(S1,HR,532nm)=5.0%+/-3% (+/-1% target), R(S2,AR,1064nm)<300ppm, R(S2,AR,532nm)<1000ppm [https://nodus.ligo.caltech.edu:30889/40m_phasemap/Specifications/ETM-coating-E0900378-01.pdf E0900378-01]
Pre-installation evaluation
SN |
Wedge |
RoC S1 [m] |
S1 T |
S2 R |
Note |
|||||
Coastline |
ATF |
LIGO Wyco |
LIGO Zygo |
@1064nm |
@532nm |
@1064nm |
@532nm |
|||
PRMU02 |
2.70deg (2deg42min) |
115.6 |
- |
- |
122.1 |
5.637% |
|
160ppm |
|
PRM |
PRMU03 |
2.72deg (2deg43min) |
116.3 |
- |
- |
122.8 |
|
||||
PRMU04 |
2.67deg (2deg40min) |
117.4 |
121.99 |
- |
124.2 |
|
||||
|
||||||||||
SN |
Wedge |
RoC S1 [m] |
S1 T |
S2 R |
Note |
|||||
Coastline |
ATF |
LIGO Wyco |
LIGO Zygo |
@1064nm |
@532nm |
@1064nm |
@532nm |
|||
SRMU01 |
2.70deg (2deg42min) |
142.3 |
147.69 |
148.8 |
150.2 |
9.903% |
98.1% |
67.6ppm |
23.6% |
|
SRMU02 |
2.68deg (2deg41min) |
145.0 |
- |
- |
- |
not delivered one |
||||
SRMU03 |
2.68deg (2deg41min) |
142.1 |
- |
149.1 |
- |
|
||||
SRMU04 |
2.73deg (2deg44min) |
- |
- |
148.1 |
- |
SRM, Wedge from Ramin's e-mail |
||||
|
||||||||||
SN |
Wedge |
RoC S1 [m] |
S1 T |
S2 R |
Note |
|||||
Coastline |
ATF |
LIGO Wyco |
LIGO Zygo |
@1064nm |
@532nm |
@1064nm |
@532nm |
|||
ITMU01 |
- |
- |
- |
29.2e3 |
- |
1.384% |
1.094% |
417ppm |
197ppm |
|
ITMU02 |
1.00deg (1deg0min) |
- |
- |
24.5e3 |
- |
|
||||
ITMU03 |
1.03deg (1deg2min) |
- |
- |
-883.4e3 |
- |
ITMY |
||||
ITMU04 |
- |
- |
- |
83.1e3 |
- |
ITMX |
||||
|
||||||||||
SN |
Wedge |
RoC S1 [m] |
S1 T |
S2 R |
Note |
|||||
Coastline |
ATF |
LIGO Wyco |
LIGO Zygo |
@1064nm |
@532nm |
@1064nm |
@532nm |
|||
ETMU05 |
2.35deg (2deg21min) |
57.6 |
60.26 |
- |
- |
13.7ppm |
4.579% |
93.3ppm |
950ppm |
ETMY |
ETMU06 |
2.36deg (2deg22min) |
57.4 |
54.58 |
- |
- |
|
||||
ETMU07 |
2.36deg (2deg22min) |
57.1 |
59.48 |
- |
- |
ETMX |
||||
ETMU08 |
2.36deg (2deg22min) |
57.9 |
54.80 |
- |
- |
|
||||
- The PRMs/SRMs have larger wedge (~2.7deg) than the spec (2 deg).
- The ITMs have ~1deg wedge instead of 2 deg.
[https://nodus.ligo.caltech.edu:30889/40m_phasemap/ Phase Map Web Page]
Post-installation evaluation
- Arm cavity characterization for 1064nm
- Finesse
- Visibility
- Roundtrip loss
- Arm cavity characterization for 532nm
- Finesse
- Visibility
- Roundtrip loss
- Power/Signal recycling gain
- g-factor measurement (mode spacing)
- Longitudinal mode spacing (FSR)
- Spacial mode spacing
Information of Pre-2010 RSE Optics
Page to tabulate all known properties of our suspended optics
http://www.ligo.caltech.edu/~gari/40MAsBuilt.htm
i.e. R's, T's, mass, size, loss, etc.
[http://www.ligo.caltech.edu/~gari/index.htm COC Home]
Notes on Installed Suspensions
- PRM was pulled from the vacuum in August 08 after an earthquake. A wire standoff was found to have come off, and was sitting on the optical table. The standoff was replaced. There is no guide rod on the left/south side.
Optics for 40 Meter RSE Experiment
[#Input%20Test%20Masses Input Test Masses]BR[#End%20Test%20Masses End Test Masses] |
[#Beam%20Splitters Beam Splitters]BR[#Recycling%20Mirrors Recycling Mirrors] |
[#Mode%20Cleaner%20Curved%20Mirrors Mode Cleaner Curved Mirrors]BR[#Mode%20Cleaner%20Flat%20Mirrors Mode Cleaner Flat Mirrors] |
Last Updated on 05/23/02BRBy GariLynn BillingsleyBREmail: Billingsley_G at LIGO
