Differences between revisions 6 and 7

aLIGO EPICs log (conlog)

The aLIGO EPICS log (conlog) for the 40m is 'working' at: http://192.168.113.209/conlog/conlog.php

The process is running inside a screen on megatron.

To start it running, you need to set your environment, and then run the startup.c1conlog script :

tcsh
cd /cvs/cds/rtcds/caltech/c1/target/conlog/conlogepics
source conlog_environment.txt
./startup.c1conlog

This will leave you at an epics prompt, which means the code is running. (That's why I left it running in a screen for now). Just disconnect from that screen session without closing it to keep the Conlog running.

To change the list of channels when the conlog is running, you need to edit the file (s):

/ligo/caltech/data/conlog/c1/add_channel_names

/ligo/caltech/data/conlog/c1/remove_channel_names

Then start up medm as follows:

cd ~/ryan/

medm -x -macro "IFO=C1" medm/CONLOG.adl

Then click the Add channel list button or Remove channel list button.

To change the channels before running the conlog from a blank database, you would edit: /ligo/caltech/data/conlog/c1/use_channel_names (I believe this should be read whenever the conlog is restarted, but I'm only sure it does the first time you start conlog).

-  ⇤ ← Revision 6 as of 2012-03-10 00:46:38 → 
  Size: 1166
  Editor: RyanfisherATligoDOTorg
  Comment:
+   ← Revision 7 as of 2012-08-03 15:36:16 → ⇥
  Size: 1261
  Editor: RyanfisherATligoDOTorg
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 11:
+tcsh
-Line 15:
+Line 16:
-This will leave you at an epics prompt, which means the code is running. (that's why I left it running in a screen for now).
+This will leave you at an epics prompt, which means the code is running. (That's why I left it running in a screen for now).  Just disconnect from that screen session without closing it to keep the Conlog running.