Differences between revisions 5 and 9 (spanning 4 versions)

aLIGO EPICs log (conlog)

The aLIGO EPICS log (conlog) for the 40m is 'working' at: http://192.168.113.209/conlog/conlog.php

The process is running inside a screen on megatron.

The restart procedures for megatron are as follows:

service mysql start
service apache2 start
screen (conlog is run from within a screen)
tcsh # just because the environment script below assumes csh instead of bash)
cd /cvs/cds/rtcds/caltech/c1/target/conlog/conlogepics
source conlog_environment.txt
./starup.c1conlog
Enter: Ctrl+a , d to exit the screen and leave the conlog running

To re-start the process if you accidentally killed the screen, you need to start up a screen, set your environment, and then run the startup.c1conlog script :

tcsh
cd /cvs/cds/rtcds/caltech/c1/target/conlog/conlogepics
source conlog_environment.txt
./startup.c1conlog

This will leave you at an epics prompt, which means the code is running. (That's why I left it running in a screen for now). Just disconnect from that screen session without closing it to keep the Conlog running.

To change the list of channels when the conlog is running, you need to edit the file (s):

/ligo/caltech/data/conlog/c1/add_channel_names

/ligo/caltech/data/conlog/c1/remove_channel_names

Then start up medm as follows:

cd ~/ryan/

medm -x -macro "IFO=C1" medm/CONLOG.adl

Then click the Add channel list button or Remove channel list button.

To change the channels before running the conlog from a blank database, you would edit: /ligo/caltech/data/conlog/c1/use_channel_names (I believe this should be read whenever the conlog is restarted, but I'm only sure it does the first time you start conlog).

-  ⇤ ← Revision 5 as of 2012-03-10 00:32:22 → 
  Size: 1190
  Editor: JennedriggersATligoDOTorg
  Comment:
+   ← Revision 9 as of 2013-04-24 13:08:26 → ⇥
  Size: 1801
  Editor: RyanfisherATligoDOTorg
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
+## page was renamed from aLIGO EPICs log (conlog)
-Line 8:
+Line 9:
-To start it running, you need to set your environment, and then run the startup.c1conlog script :
+The restart procedures for megatron are as follows:
  * service mysql start
  * service apache2 start
  * screen (conlog is run from within a screen)
  * tcsh # just because the environment script below assumes csh instead of bash)
  * cd /cvs/cds/rtcds/caltech/c1/target/conlog/conlogepics
  * source conlog_environment.txt
  * ./starup.c1conlog
  * Enter: Ctrl+a , d to exit the screen and leave the conlog running

To re-start the process if you accidentally killed the screen, you need to start up a screen, set your environment, and then run the startup.c1conlog script :
-Line 11:
+Line 22:
-source /home/controls/ryan/conlog_environment.txt
+tcsh
-Line 14:
+Line 24:
+source conlog_environment.txt
-Line 17:
+Line 27:
-This will leave you at an epics prompt, which means the code is running. (that's why I left it running in a screen for now).
+This will leave you at an epics prompt, which means the code is running. (That's why I left it running in a screen for now).  Just disconnect from that screen session without closing it to keep the Conlog running.