|
Size: 78
Comment:
|
← Revision 10 as of 2017-11-10 20:33:16 ⇥
Size: 759
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 3: | Line 3: |
| This page should contain various calibration information. | I'm working on a simple model of the differential arm length sensing and control loop to guide work on real-time calibration. The model is based on Figure 6-1 in Rana's thesis. We will start tests for a real-time calibration system on one of the 40 m arm cavities using the digital control system. - Eric Hendries = Calibration Using Green = [[Calibration/SoCal]] === OSEMs === The rough calibration of the OSEMs we have now (2009 - the Adhikari/Fritschel OSEMs from 1999) is 2V/mm. <<BR>> Then the signal gets whitened in hardware with a 30,100:3 (poles:zeros) whitening filter with a gain of 1 at DC. <<BR>> The ADC calibration is then 16384 cts/V. <<BR>> === Seismometers === === Magnetometers === === Steve === |
Calibration
I'm working on a simple model of the differential arm length sensing and control loop to guide work on real-time calibration. The model is based on Figure 6-1 in Rana's thesis. We will start tests for a real-time calibration system on one of the 40 m arm cavities using the digital control system. - Eric Hendries
= Calibration Using Green =
OSEMs
The rough calibration of the OSEMs we have now (2009 - the Adhikari/Fritschel OSEMs from 1999) is 2V/mm.
Then the signal gets whitened in hardware with a 30,100:3 (poles:zeros) whitening filter with a gain of 1 at DC.
The ADC calibration is then 16384 cts/V.
Seismometers
Magnetometers