|
Size: 3115
Comment:
|
Size: 3132
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 73: | Line 73: |
| I, Fabricate | I. Fabricate 1. material BK-7, grade A 2. diameter 6.5" + - 0.02", 3. thickness 1" + - 0.02", 4. wedge 2 degrees 5. bevel both sides ~ 0.04" 6. surface quality 10-5 7. flatness 1/4 wave 8. meet specs on central 5.5" |
| Line 75: | Line 83: |
| 1. material BK-7, grade A diameter 6.5" + - 0.02", thickness 1" + - 0.02", wedge 2 degrees bevel both sides ~ 0.04" surface quality 10-5 flatness 1/4 wave meet specs on central 5.5" |
II. AR Coating |
| Line 83: | Line 85: |
| II, AR Coating 1, R < 0.2% at 532 and 1064 nm 2, incident angles 0-10 degrees on both sides 3, over the central 5" diameter 4, coat witness plates as shown below |
1. R < 0.2% at 532 and 1064 nm 2. incident angles 0-10 degrees on both sides 3. over the central 5" diameter 4. coat witness plates as shown below |
| Line 92: | Line 92: |
| 1, verify the specs via measurement before shipping 2, identify coating processes |
1. verify the specs via measurement before shipping 2. identify coating processes |
Contents
►Folding mirrors
We use 2inch mirrors (d2" x t3/8") mirrors for the PRC/SRC folding mirrors.
Their name has been changed such that the definition agrees with the AdvLIGO naming. (12/01/2009)
Specs of the folding mirrors (as of Dec 16, 2009)
Name |
PR2 |
PR3 |
SR3 |
SR2 |
Size |
2"dia. X 3/8" thick |
2"dia. X 3/8" thick |
2"dia. X 3/8" thick |
2"dia. X 3/8" thick |
Incident angle |
2.5 deg |
36.5 deg |
44 deg |
6 deg |
HR Transmission 1064 nm |
500ppm |
< 100 ppm |
< 100ppm |
< 100ppm |
AR Reflection 1064 nm |
< 0.25% |
< 0.25% |
< 0.25% |
< 0.25% |
ROC |
Flat |
Flat |
Flat |
Flat |
Wedge angle |
1 deg |
1 deg |
1 deg |
1 deg |
Qty. |
2 |
2 |
2 |
2 |
R for 532nm to be considered!
At the installation in 2010, G&H HR mirrors were used for the TT mirrors. This results very little transmission through those mirrorrs (<25ppm).
2" Dichroic Recycling Cavity Mirrors from Laseroptik, measurement data of 06-29-2012
26062ke2_HT532nms+p_HR1064nmp39-48°.pdf
25062ke1_AR532nms+p+1064nmp39-48°.pdf
Gooch & Housego 2" & 1" mirrors 03/15/2010
►Miscellaneous Optics (as of May 12, 2010)
Reflectivity and Transmissivity measurement for various mirrors with 523nm and 1064nm
40m_optics_list_upgrade_101214.pdf
40m_optics_list_upgrade_101214.xls
6.5" Window Specs for Optical Table Enclosure, March 2013
- [[ WINDOW SPECS FOR OPTICAL TABLE COVER AT 40M
We changed some details, look carefully. Please quote us as shown below for 4 pieces of large windows and 5 pieces of 1" diameter mirrors
Window specs
I. Fabricate
- material BK-7, grade A
- diameter 6.5" + - 0.02",
- thickness 1" + - 0.02",
- wedge 2 degrees
- bevel both sides ~ 0.04"
- surface quality 10-5
- flatness 1/4 wave
- meet specs on central 5.5"
II. AR Coating
R < 0.2% at 532 and 1064 nm
- incident angles 0-10 degrees on both sides
- over the central 5" diameter
- coat witness plates as shown below
III, Verify
- verify the specs via measurement before shipping
- identify coating processes
IV, small mirrors (witness plates for 6.5" window coating run) 5 pieces
1, material BK-7, grade A 2, diameter 1", 0.25" thick minimum 3, wedge 1 degree 4, surface quality 10-5 5, coat one side only 6, use same coating run as 6.5" windows ]]