|
Size: 3343
Comment:
|
Size: 1488
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| ## page was renamed from Upgrade 09/Optics | |
| Line 2: | Line 3: |
| ------ = ►Main optics = We use SOS size (d75mm x t25mm) mirrors for the main optics. == Specifications & Data Sheets == <<ImageLink(091111_optics_spec_t.png, Upgrade_09/Optics/Spec_Summary)>>[attachment:091111_optics_spec.pdf PDF] Specifications for 40m upgrade[https://nodus.ligo.caltech.edu:30889/svn/trunk/docs/upgrade08/cocdocs/LatestPDFs 40mSVN] COC documents/drawing files[https://nodus.ligo.caltech.edu:30889/svn/trunk/docs/upgrade08/cocdocs/ 40mSVN] Data sheets from ATF[https://nodus.ligo.caltech.edu:30889/svn/trunk/docs/upgrade08/cocdocs/Data_Sheet_sent_by_ATF/ 40mSVN] ------ == Substrate Material == The material of the substrate is Corning 7980 Fused Silica, grade UV-0A. [http://www.corning.com/docs/specialtymaterials/pisheets/H0607_hpfs_Standard_ProductSheet.pdf Link to the data sheet of Corning 7980] == Radius of Curvatures == [[Upgrade 08/Optics/RCParams|Considerations on the parameters of PRC/SRC]] == Discrepancies between the spec and the delivered optics == * We are going to use one of the SRMs as a temporaly PRM. * PRMs and SRMs will have the wedge angle larger than the spec (see below). PRMs were returned for repolish. Thus, their wedge angles might be vary. This is to be confirmed. * ITMs have the wedge angle of ~1deg, instead of the spec "2 deg" '''Communication between ATF and Coastline''' {{{ From: Gene Lapp Sent: Tuesday, July 28, 2009 4:00 PM To: Ramin Lalezari Cc: Vern Korn; John Tardif (E-mail) Subject: Power Recycling Mirrors / Signal Recycling Mirrors Ramin, I've run across another small problem with the Power Recycling & Signal Recycling Mirrors. The wedge angle is called out as 2° 30' ± 5'. The parts are measuring between 2° 40' and 2° 44' (all ± 0.5'). We have traced this problem to an error in our wedge tool, which is nominally at 2° 40'. All the mirrors have been measured except for one Signal Recycling Mirror (currently on the polishing machine). I expect that it will be in the same condition. The measurements are as follows: PRMU01 2° 40' PRMU02 2° 42' PRMU03 2° 43' PRMU04 2° 40' (extra) SRMU01 - SRMU02 2° 41' SRMU03 2° 41' SRMU04 2° 44' (extra) }}} |
|
| Line 68: | Line 21: |
| Line 70: | Line 27: |
| <!> At the installation in 2010, G&H HR mirrors were used for the TT mirrors. This results very little transmission through those mirrorrs (<25ppm). |
|
| Line 71: | Line 30: |
== 2" Dichroic Recycling Cavity Mirrors from Laseroptik, measurement data of 06-29-2012 == |
|
| Line 73: | Line 37: |
| [[Upgrade 09/Optics/RTmeasurement|Reflectivity and Transmissivity measurement for various mirrors with 523nm and 1064nm]] | [[Upgrade_09/Optics/RTmeasurement|Reflectivity and Transmissivity measurement for various mirrors with 523nm and 1064nm]] |
| Line 75: | Line 39: |
| [[Upgrade 09/Optical Layout|Optical Layout]] | [[Optical_Layout]] |
| Line 77: | Line 41: |
| attachment:40m_optics_list_upgrade_100512.png | {{attachment:40m_optics_list_upgrade_101214.png}} |
| Line 79: | Line 43: |
| attachment:40m_optics_list_upgrade_100512.pdf | [[attachment:40m_optics_list_upgrade_101214.pdf]] |
| Line 81: | Line 45: |
| attachment:40m_optics_list_upgrade_100512.xls | [[attachment:40m_optics_list_upgrade_101214.xls]] |
Contents
►Folding mirrors
We use 2inch mirrors (d2" x t3/8") mirrors for the PRC/SRC folding mirrors.
Their name has been changed such that the definition agrees with the AdvLIGO naming. (12/01/2009)
Specs of the folding mirrors (as of Dec 16, 2009)
Name |
PR2 |
PR3 |
SR3 |
SR2 |
Size |
2"dia. X 3/8" thick |
2"dia. X 3/8" thick |
2"dia. X 3/8" thick |
2"dia. X 3/8" thick |
Incident angle |
2.5 deg |
36.5 deg |
44 deg |
6 deg |
HR Transmission 1064 nm |
500ppm |
< 100 ppm |
< 100ppm |
< 100ppm |
AR Reflection 1064 nm |
< 0.25% |
< 0.25% |
< 0.25% |
< 0.25% |
ROC |
Flat |
Flat |
Flat |
Flat |
Wedge angle |
1 deg |
1 deg |
1 deg |
1 deg |
Qty. |
2 |
2 |
2 |
2 |
R for 532nm to be considered!
At the installation in 2010, G&H HR mirrors were used for the TT mirrors. This results very little transmission through those mirrorrs (<25ppm).
2" Dichroic Recycling Cavity Mirrors from Laseroptik, measurement data of 06-29-2012
►Miscellaneous Optics (as of May 12, 2010)
Reflectivity and Transmissivity measurement for various mirrors with 523nm and 1064nm
