Diff for "Automated_Noise_Characterization"

Differences between revisions 8 and 12 (spanning 4 versions)

The summer project will entail modifying pre-existing automated noise budget code for use on the 40M with an eye for cross-site compatibility. New sensors will be added to the noise budget calculations.

SURF Progress Report #1:

attachment:MaxJonesProgressReport_RoughDraft_3.pdf

SURF Progress Report #2

attachment:MaxJonesSecondProgressReport_RD_1.pdf

SURF Abstract

attachment:SURFAbstract.pdf

Current Status of the 40 m Noise Budget (by source): DARM - Plotting. LSCmodel.m must be revised. MICH - Plotting. PRC - Plotting. Oscillator - Plotting. OpticalLevers - Plotting. WFS - Not yet plotting. OSEM - Not yet plotting. Seismic - Plotting. It may be necessary to obtain new stack and pendulum transfer functions,

but otherwise accurate. Re-Written.

ETM - Plotting. ITM - Plotting. BS - Plotting. SusTherm - Plotting. IntTherm - Plotting. Shot - Not Yet plotting. Dark - Not Yet plotting. Intensity - Plotting. Frequency - Plotting.

The addition of sources to the 40 m noise budget follows the following steps: 1) Modify the scripts (usually NoiseBudget.m, get(insert noise source).m and get_dtt_dataset.m) to accept

and plot data from 40 m channels. Often Hanford or Livingston parameters or transfer functions are used

-  ⇤ ← Revision 8 as of 2008-07-31 23:38:36 → 
  Size: 367
  Editor: MaxJones
  Comment:
+   ← Revision 12 as of 2008-08-08 17:24:41 → ⇥
  Size: 1293
  Editor: MaxJones
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 10:
+SURF Abstract 

attachment:SURFAbstract.pdf

Current Status of the 40 m Noise Budget (by source):
DARM - Plotting. LSCmodel.m must be revised. 
MICH - Plotting.
PRC - Plotting.
Oscillator - Plotting.
OpticalLevers - Plotting.
WFS - Not yet plotting.
OSEM - Not yet plotting.
Seismic - Plotting. It may be necessary to obtain new stack and pendulum transfer functions, 
          but otherwise accurate. Re-Written.
ETM - Plotting.
ITM - Plotting.
BS - Plotting.
SusTherm - Plotting.
IntTherm - Plotting.
Shot - Not Yet plotting.
Dark - Not Yet plotting.
Intensity - Plotting.
Frequency - Plotting.

The addition of sources to the 40 m noise budget follows the following steps:
1) Modify the scripts (usually NoiseBudget.m, get(insert noise source).m and get_dtt_dataset.m) to accept 
   and plot data from 40 m channels. Often Hanford or Livingston parameters or transfer functions are used