Differences between revisions 16 and 17
⇤ ← Revision 16 as of 2006-12-11 02:43:17 →
Size: 2513
Editor: ValeraFrolov
Comment:
← Revision 17 as of 2010-06-01 22:38:56 → ⇥
Size: 104
Editor: KojiArai
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
----
 * Design and ASC scheme after we design one for AdvLIGO
 * Implement and test the new InGaAs, in-vac, high power, FTC WFS. The 40m WFS need not be
  . in-vac, but they should be packaged as such.
 * Measure spring stuff

----
 . [[Simulink Model of 40m Optical Springs]]

----
 This file attachment:40m.pdf contains some results for the 40m ASC sensing matrix.

The input for this calculation was taken from 40m web page: http://www.ligo.caltech.edu/~ajw/40m_upgrade.html. The loss per optic was increased from 37.5 ppm to more realistic 100 ppm.

== DC Alignment ==
Below are two diagrams which illustrate the proposed method to align the 40m IFO while it is locked. Currently the controls are done using Perl scripting.

In the diagrams the dither signals to the optics are in the YAW axis of the optics, but this is done in a similar manner in the PIT axis. The labels in the colored boxes are the channels (shown in YAW, but valid for PIT as well) to which the obtained error-signals, from the demodulation, are fed back to.

attachment:DC_ASC_Inline.png

    . '''Figure 1'''. Diagram of the 40m IFO in-line arm cavity (XARM). The PRM and BS are omitted for clarity.

'''In-line cavity legend - Figure 1:'''
|| IP_POS || Otherwise known as PZT1, located in front of the PRM. Steers the beam into the IFO. ||
|| IP_ANG || Otherwise known as PZT2, located after IP_POS and before the PRM. Also, steers the beam into the IFO. ||
|| ITMx || The ITM of the x-arm, ITMX. ||
|| ETMx || The ETM of the x-arm, ETMX. ||
|| PDH-err || The demodulated length control signal, ''C1:LSC-XARM_IN1''. ||
|| TRX || The transmitted power of the x-arm, ''C1:LSC-TRX_OUT''. ||
|| L.O. ITMx || Modulation of the ITMx in PIT or YAW using tdssine. ||
|| L.O. ETMx || Modulation of the ETMx in PIt or YAW using tdssine. ||

attachment:DC_ASC_Perp.png

    . '''Figure 2'''. Diagram of the 40m IFO perpendicular arm cavity (YARM).

'''Perpendicular arm legend - Figure 2:'''

|| BS || Beamsplitter, steers the beam into the perpendicular arm cavity (y-arm). ||
|| ITMy || The ITM of the y-arm, ITMY. ||
|| ETMy || The ETM of the y-arm, ETMY. ||
|| PDH-err || The demodulated length control signal, ''C1:LSC-YARM_IN1''. ||
|| TRY || The transmitted power of the y-arm, ''C1:LSC-TRY_OUT''. ||
|| L.O. ITMy || Modulation of the ITMy in PIT or YAW using tdssine. ||
|| L.O. ETMy || Modulation of the ETMy in PIt or YAW using tdssine. ||

----

Diagram for digital dither alignment scheme of the DRFPMI
attachment:40mASC.pdf		 [[RF_ASC|RF based alignment & sensing control]]
[[Dither_ASC|Dither based alignment & sensing control]]

RF based alignment & sensing control Dither based alignment & sensing control

Alignment_Sensing_and_Control (last edited 2012-01-03 23:03:06 by localhost)