Differences between revisions 12 and 13
Revision 12 as of 2006-11-30 21:53:51
Size: 2087
Comment:
Revision 13 as of 2006-11-30 21:55:49
Size: 2117
Comment:
Deletions are marked like this. Additions are marked like this.
Line 22: Line 22:
'''Labels - Figure 1:''' '''In-line cavity legend - Figure 1:'''
Line 36: Line 36:
'''Perpendicular Labels:''' '''Perpendicular arm legend - Figure 2:'''


  • Design and ASC scheme after we design one for AdvLIGO
  • Implement and test the new InGaAs, in-vac, high power, FTC WFS. The 40m WFS need not be

    • in-vac, but they should be packaged as such.
  • Measure spring stuff



  • This file attachment:40m.pdf contains some results for the 40m ASC sensing matrix.

The input for this calculation was taken from 40m web page: http://www.ligo.caltech.edu/~ajw/40m_upgrade.html. The loss per optic was increased from 37.5 ppm to more realistic 100 ppm.

DC Alignment

Below are two diagrams which illustrate the proposed method to align the 40m IFO while it is locked. Currently the controls are done using Perl scripting.

attachment:DC_ASC_Inline.png

  • Figure 1. Diagram of the 40m IFO in-line arm cavity (XARM). The PRM and BS are omitted for clarity.

In-line cavity legend - Figure 1:

IP_POS

Otherwise known as PZT1, located in front of the PRM. Steers the beam into the IFO.

IP_ANG

Otherwise known as PZT2, located after IP_POS and before the PRM. Also, steers the beam into the IFO.

ITMx

The ITM of the x-arm, ITMX.

ETMx

The ETM of the x-arm, ETMX.

PDH-err

The demodulated length control signal, C1:LSC-XARM_IN1.

TRX

The transmitted power of the x-arm, C1:LSC-TRX_OUT.

L.O. ITMx

Modulation of the ITMx in PIT or YAW using tdssine.

L.O. ETMx

Modulation of the ETMx in PIt or YAW using tdssine.

attachment:DC_ASC_Perp.png

  • Figure 2. Diagram of the 40m IFO perpendicular arm cavity (YARM).

Perpendicular arm legend - Figure 2:

BS

Beamsplitter, steers the beam into the perpendicular arm cavity (y-arm).

ITMy

The ITM of the y-arm, ITMY.

ETMy

The ETM of the y-arm, ETMY.

PDH-err

The demodulated length control signal, C1:LSC-YARM_IN1.

TRY

The transmitted power of the y-arm, C1:LSC-TRY_OUT.

L.O. ITMy

Modulation of the ITMy in PIT or YAW using tdssine.

L.O. ETMy

Modulation of the ETMy in PIt or YAW using tdssine.

Alignment_Sensing_and_Control (last edited 2012-01-03 23:03:06 by localhost)