|
Size: 2088
Comment:
|
Size: 2164
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 47: | Line 47: |
| . attachment:orange.png make the wiki page better and more user friendly |
goals in this month
get a green beam coming from the chamber to the PSL table
do a science at the PSL table
develop a simlink model for simulated plant
to do list
attachment:green.png complete |
attachment:orange.png intermediate state |
attachment:red.png nothing happened |
attachment:black.png gave up |
in-vac work
- attachment:green.png align the beam axis at the end station
- attachment:green.png open the heavy doors
- attachment:green.png take the access connector out
- attachment:green.png install the last periscope and steering mirrors
- attachment:orange.png final alignment including 1064 optics
work at the PSL table
- attachment:green.png put a 90/10 beam splitter after the PMC
- attachment:green.png rearrange the doubling crystal
- attachment:orange.png mode match to the doubling crystal
- attachment:red.png check the polarization of the crystal
- attachment:red.png make the hole wider on the wall of the PSL booth
- attachment:red.png place Hartmut's RFPD
- attachment:red.png characterization of the RFPD
- attachment:red.png find beat note by sweeping the end laser's temperature
digital system
attachment:orange.png prepare the front end machined c1iscex
- attachment:green.png make a simulated plant
- attachment:red.png run the realtime code on a Gentoo
- attachment:orange.png RFM
- attachment:red.png recheck the ADCs
- attachment:red.png digitally slow feedback to the laser temperature
misc.
- attachment:green.png re-check the items
- attachment:red.png re-check the mode matching of the beam going to the cavity
- attachment:red.png have a prediction what we will see at the vertex
- attachment:orange.png make the wiki page better and more user friendly
considerations
what is the polarization of the doubling crystal
Do we really have ADCs for green ?
- breakout boards
- binary outputs