## page was renamed from Upgrade 09/GreenLock/November 2010
= goals in this month =
. ''''' - Do something by using green beat note'''''
. ''''' - Prepare digital systems '''''
<
>
= to do list =
||{{attachment:green.png}} '''complete'''|| {{attachment:orange.png}} '''intermediate state ''' || {{attachment:red.png}} '''nothing happened''' || {{attachment:black.png}} gave up||
<
>
. ''' in-vac work '''
. {{attachment:green.png}} final alignment
. {{attachment:green.png}} fix a clipped beam
<
>
. ''' optics '''
. {{attachment:green.png}} check the fiber
. {{attachment:green.png}} preparation for the 1064nm beat note
. {{attachment:orange.png}} find out the cause of a 20dB missing factor in the beat note detection
<
>
. ''' work on some electronics '''
. {{attachment:green.png}} noise characterization of the RFPD
. {{attachment:green.png}} VCO check
. {{attachment:orange.png}} noise characterization of the VCO
. {{attachment:red.png}} preparation for power line for the PFPDs and VCOs
<
>
. ''' digital system'''
. {{attachment:green.png}} prepare the front end machine {{{ c1iscex }}}
. {{attachment:green.png}} run the realtime code on a Gentoo
. {{attachment:green.png}} RFM
. {{attachment:green.png}} recheck the ADCs
. {{attachment:green.png}} digitally slow feedback to the laser temperature
<
>
. ''' misc. '''
. {{attachment:green.png}} power budget
. {{attachment:orange.png}} re-check the mode matching of the beam going to the cavity
. {{attachment:orange.png}} renew some old diagrams
<
>
= considerations =
== How to add an offset to the PLL ==
. ''' How to do it ? '''
. How many channels ?
. ''' What kind of digital control do we need ? '''
. Using epics slow channels ?
. Using a realtime control ?
. ''' What kind of analog circuit do we need ? '''
. Anti Aliasing ?
. Dewhitening ?
== Noise requirements for pre-arm stabilization ==
. ''' what is the actuation coefficient ''' of the ETM OSEMs
. ''' Noise budget '''