|
Size: 1899
Comment:
|
Size: 2123
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 21: | Line 21: |
| . attachment:orange.png find out the cause of a 20dB missing factor in the beat note detection | |
| Line 26: | Line 26: |
| . attachment:orange.png figure out 20dB missing factor in the beat note detection | |
| Line 29: | Line 28: |
| . attachment:red.png preparation for power line for the PFPDs and VCOs | |
| Line 67: | Line 67: |
== Power lines to electronics == . ''' +/-15V +/-24V -150V ''' . ''' where do we get those ?''' . ''' How long should they be |
goals in this month
- Do something by using green beat note
- Prepare digital systems
to do list
attachment:green.png complete |
attachment:orange.png intermediate state |
attachment:red.png nothing happened |
attachment:black.png gave up |
in-vac work
- attachment:orange.png final alignment
- attachment:red.png fix a clipped beam
optics
- attachment:orange.png check the fiber
- attachment:red.png preparation for the 1064nm beat note
- attachment:orange.png find out the cause of a 20dB missing factor in the beat note detection
work on some electronics
- attachment:red.png noise characterization of the RFPD
- attachment:orange.png VCO check
- attachment:red.png noise characterization of the VCO
- attachment:red.png preparation for power line for the PFPDs and VCOs
digital system
attachment:orange.png prepare the front end machine c1iscex
- attachment:red.png run the realtime code on a Gentoo
- attachment:orange.png RFM
- attachment:red.png recheck the ADCs
- attachment:red.png digitally slow feedback to the laser temperature
misc.
- attachment:orange.png power budget
- attachment:red.png re-check the mode matching of the beam going to the cavity
- attachment:red.png renew some old diagrams
considerations
How to add an offset to the PLL
How to do it ?
- How many channels ?
What kind of digital control do we need ?
- Using epics slow channels ?
- Using a realtime control ?
What kind of analog circuit do we need ?
- Anti Aliasing ?
- Dewhitening ?
Noise requirements for pre-arm stabilization
what is the actuation coefficient of the ETM OSEMs
Noise budget
Power lines to electronics
+/-15V +/-24V -150V
where do we get those ?
How long should they be