Differences between revisions 7 and 17 (spanning 10 versions)

Electronics

outline

Preliminary design for the electronics used in 40m green locking.

BR BR

VCO

80MHz LIGO VCO box is used to readout the frequency of the beat signal precisely.

PDH box

what kind of modification

frequency counter

SR620 is employed to read out the frequency of the beat signal.

attachment:SR620.png

setting parameters
readout range		MHz
DAC bit resolution
noise

digital channel assign

whitening filter

what is the specification for each channel

wideband RFPD for green PLL

A Silicon photodiode with the diameter of 10mm is used.

To have a fast response up to about 1MHz -150V is applied onto the photo diode.

The schematic is available at https://nodus.ligo.caltech.edu:30889/svn/trunk/alberto/40mUpgrade/RFsystem/RFPDs/GreenLockingBroadBandPD

frequency response

attachment:RFPD_tf.png

noise performance

attachment:RFPDnoise.png

digital front end

anti-aliasing filter
anti-imaging filter

Advanced_Techniques/Green_Locking/Electronics (last edited 2017-04-20 01:58:36 by RanaadhikariATligoDOTorg)

-  ⇤ ← Revision 7 as of 2010-04-30 20:35:41 → 
  Size: 313
  Editor: KiwamuIzumi
  Comment:
+   ← Revision 17 as of 2010-11-24 23:43:24 → ⇥
  Size: 1371
  Editor: KiwamuIzumi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
-Preliminary design for the electronics used in 40m green locking.
+== outline ==
 
 . Preliminary design for the electronics used in 40m green locking.
-Line 5:
+Line 7:
-<<ImageLink(electronics_diagram.png,Upgrade 09/GreenLock/Electronics/electronics_diagram design for the end,height=400)>>
+<<ImageLink(electronics_diagram.png,Upgrade 09/GreenLock/Electronics/electronics_diagram,height=400)>>

[[BR]]
[[BR]]
-----
== VCO ==
 . 80MHz LIGO VCO box is used to readout the frequency of the beat signal precisely.

 
-----
[[BR]]
== PDH box ==

 . what kind of modification 

[[BR]]
-----
== frequency counter ==

 .SR620 is employed to read out the frequency of the beat signal.

attachment:SR620.png

||<-3> '''''setting parameters''''' ||
|| readout range || || MHz ||
|| DAC bit resolution || || ||
|| noise || || ||
-Line 8:
+Line 36:
-== VCO ==
+[[BR]]
-----
== digital channel assign ==
-Line 10:
+Line 40:
-== PDH box ==
+<<ImageLink(green_digital.png,Upgrade 09/GreenLock/Electronics/digital_channel ,height=400)>>
-Line 12:
+Line 42:
-== frequency discriminator ==
-Line 14:
+Line 43:
+[[BR]]
-----
-Line 16:
+Line 47:
+ . what is the specification for each channel

[[BR]]
-----
== wideband RFPD for green PLL ==
 . A Silicon photodiode with the diameter of 10mm is used. 
To have a fast response up to about 1MHz -150V is applied onto the photo diode.

 . The schematic is available at https://nodus.ligo.caltech.edu:30889/svn/trunk/alberto/40mUpgrade/RFsystem/RFPDs/GreenLockingBroadBandPD

=== frequency response ===
attachment:RFPD_tf.png

=== noise performance ===
attachment:RFPDnoise.png

[[BR]]
-----
-Line 17:
+Line 66:
+ . anti-aliasing filter
 
 . anti-imaging filter