|
Size: 245
Comment:
|
Size: 1563
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| <<ImageLink(electronics_diagram.png,Upgrade 09/GreenLock/Electronics/electronics_diagram design for the end,height=400)>> | == outline == . Preliminary design for the electronics used in 40m green locking. <<ImageLink(electronics_diagram.png,Upgrade 09/GreenLock/Electronics/electronics_diagram,height=400)>> [[BR]] [[BR]] ----- == VCO == . 80MHz LIGO VCO box is used to readout the frequency of the beat signal precisely. ----- [[BR]] == PDH box == . what kind of modification [[BR]] ----- == frequency counter == .SR620 is employed to read out the frequency of the beat signal. attachment:SR620.png ||<-3> '''''setting parameters''''' || || readout range || || MHz || || DAC bit resolution || || || || noise || || || |
| Line 5: | Line 36: |
| == VCO == | [[BR]] ----- == digital channel assign == |
| Line 7: | Line 40: |
| == PDH box == | <<ImageLink(green_digital.png,Upgrade 09/GreenLock/Electronics/digital_channel ,height=400)>> |
| Line 9: | Line 42: |
| == frequency discriminator == | |
| Line 11: | Line 43: |
| [[BR]] ----- |
|
| Line 13: | Line 47: |
| . what is the specification for each channel [[BR]] ----- == wideband RFPD for green PLL == . A Silicon photodiode with the diameter of 10mm is used. To have a fast response up to about 1MHz -150V is applied onto the photo diode. The schematic is available on [https://nodus.ligo.caltech.edu:30889/svn/trunk/alberto/40mUpgrade/RFsystem/RFPDs/GreenLockingBroadBandPD svn] === frequency response === attachment:RFPD_tf.png === noise performance === attachment:RFPDnoise.png Here is the noise model for the RFPD using liso. attachment:liso_RFPD.png [[BR]] ----- |
|
| Line 14: | Line 67: |
. anti-aliasing filter . anti-imaging filter [[BR]] ----- == Power Supply and Cables == === HV cables (-150V) for photodiode bias === === 15V and 24V lines === |
Electronics
outline
- Preliminary design for the electronics used in 40m green locking.
VCO
- 80MHz LIGO VCO box is used to readout the frequency of the beat signal precisely.
PDH box
- what kind of modification
frequency counter
- SR620 is employed to read out the frequency of the beat signal.
attachment:SR620.png
setting parameters |
||
readout range |
|
MHz |
DAC bit resolution |
|
|
noise |
|
|
digital channel assign
whitening filter
- what is the specification for each channel
wideband RFPD for green PLL
- A Silicon photodiode with the diameter of 10mm is used. To have a fast response up to about 1MHz -150V is applied onto the photo diode.
The schematic is available on [https://nodus.ligo.caltech.edu:30889/svn/trunk/alberto/40mUpgrade/RFsystem/RFPDs/GreenLockingBroadBandPD svn]
frequency response
attachment:RFPD_tf.png
noise performance
attachment:RFPDnoise.png
Here is the noise model for the RFPD using liso. attachment:liso_RFPD.png
digital front end
- anti-aliasing filter
- anti-imaging filter
Power Supply and Cables
HV cables (-150V) for photodiode bias