|
Size: 2446
Comment:
|
Size: 2468
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 35: | Line 35: |
| attachment:TF_PDH.png |
outline
- Preliminary design for the electronics used in 40m green locking.
Contents
VCO for frequency tracking
VCO range
- Synergy VCO part number XXX has 1.2MHz/V VCO range.
attachment:VCO_range.png
Filter respons
- 80MHz LIGO VCO box is used to readout the frequency of the beat signal precisely.
attachment:VCO_filter.png
Noise performance
lock detection and boost
- rms detection
PDH box
Filter Shape
attachment:TF_PDH.png
Noise performance
LPF for RF cutoff
Low frequency mixer
Remotely controlled Boost switch
frequency counter
- SR620 is employed to read out the frequency of the beat signal.
attachment:SR620.png
setting parameters |
||
readout range |
|
MHz |
DAC bit resolution |
|
|
noise |
|
|
digital channel assign
wideband RFPD for green PLL
- A Silicon photodiode with the diameter of 10mm is used. To have a fast response up to about 1MHz -150V is applied onto the photo diode.
The schematic is available on [https://nodus.ligo.caltech.edu:30889/svn/trunk/alberto/40mUpgrade/RFsystem/RFPDs/GreenLockingBroadBandPD svn]
frequency response
attachment:RFPD_tf.png
noise performance
attachment:RFPDnoise.png
Here is the noise model for the RFPD using liso. attachment:liso_RFPD.png
DC PDs
PDA36A
- attachment:PDA36A.png
parameters |
|||
trans impedance gain |
|
[V/A] |
|
responsibility |
|
[A/W] |
|
quantum efficiency |
|
[%] |
|
= digital front end filters=
- anti-aliasing filter
- anti-imaging filter
- whitening filter
Thermal feedback LPF
circuit diagram
attachment:thermalLPF.png
expected transfer function of composed frequency actuator
attachment:thermal_actuator.png
Function Generator
- To get a phase modulation imposed on the end IR lasers, a function generator is needed.
SR___
Temperature Controller for doubling oves
. TC200 from Thorlabs
Power Supply and Cables
HV cables (-150V) for photodiode bias