Differences between revisions 16 and 19 (spanning 3 versions)

Electronics

outline

80MHz LIGO VCO box is used to readout the frequency of the beat signal precisely.

attachment:SR620.png

A Silicon photodiode with the diameter of 10mm is used. To have a fast response up to about 1MHz -150V is applied onto the photo diode.

attachment:RFPD_tf.png

attachment:RFPDnoise.png

Here is the noise model for the RFPD using liso. attachment:liso_RFPD.png

Advanced_Techniques/Green_Locking/Electronics (last edited 2017-04-20 01:58:36 by RanaadhikariATligoDOTorg)

-  ⇤ ← Revision 16 as of 2010-11-24 23:42:32 → 
  Size: 1320
  Editor: KiwamuIzumi
  Comment:
+   ← Revision 19 as of 2010-11-24 23:47:50 → ⇥
  Size: 1563
  Editor: KiwamuIzumi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 52:
- . A Silicon photodiode with the diameter of 10mm is used. 
To have a fast response up to about 1MHz -150V is applied onto the photo diode.
+ . A Silicon photodiode with the diameter of 10mm is used. To have a fast response up to about 1MHz -150V is applied onto the photo diode.
The schematic is available on [https://nodus.ligo.caltech.edu:30889/svn/trunk/alberto/40mUpgrade/RFsystem/RFPDs/GreenLockingBroadBandPD svn]
 Line 55:
- . The schematic is available at https://nodus.ligo.caltech.edu:30889/svn/trunk/alberto/40mUpgrade/RFsystem/RFPDs/GreenLockingBroadBandPD
+=== frequency response ===
attachment:RFPD_tf.png
-Line 59:
+Line 60:
+Here is the noise model for the RFPD using liso.
attachment:liso_RFPD.png
-Line 67:
+Line 71:
+[[BR]]
-----
== Power Supply and Cables ==
=== HV cables (-150V) for photodiode bias ===
=== 15V and 24V lines ===